755K CRAWLER LOADER
- Net Power: 145 kW (194 hp) @ 1,800 rpm
- Operating Weight: 20 492 kg (45,178 lb.)
- Heaped Capacity: 2.5 m3 (3.2 cu. yd.)
- Breakout Force: 197 kN (44,287 lbf)
View Product Brochure
FT4/Stage IV-compliant 6.8-L John Deere PowerTech™ engine boasts a boost in horsepower and standard Eco mode, for maximum fuel economy without loss of performance.
Auto-idle helps save fuel by reducing engine speed when the crawler loader is not moving and no functions are being activated.
Dual-path hydrostatic (HST) transmission allows you to carry a full load through turns without losing material.
HST drivetrain and load-sensing hydraulics deliver fatigue-beating, low-effort response and control, at all times and in all conditions.
Hydraulically driven fan runs only as needed, for cooling and fuel efficiency.
Counter-rotating tracks boost maneuverability on crowded jobsites.
Infinitely variable speed range to 6.2 mph
Single-lever joystick or two or three-lever hydraulic controls - choose the layout that best fits your operator’s style.
Control the throttle using buttons on the sealed-switch module.
Heavy-duty undercarriage is sealed, lubricated, and built to last.
Swing-out side shields and tilt-out grille enable access to both sides of the coolers, for low effort debris removal.
Compare the specifications of up to 4 models
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PVS 6068|
|Emission Rating||Tier 4|
|Displacement, ltr (Inches³)||6.8 (415)|
|Rated Speed, rpm||1800|
|Engine Output - Net, kW (hp)||145 (194)|
|Final drive type||In-line Drive Motor - Double Reduction Planetary|
|Track rollers per side - std||6|
|Track shoe pitch, mm (inches)||203 (8)|
|Track shoe width, mm (inches)||560 (22)|
|Ground Contact Area, cm² (Inches²)||28985 (4493)|
|Track shoes per side - std||38|
|Overall length, mm (ft/in)||6824 (22 ft 5 in)|
|Max. height, mm (ft/in)||3330 (10 ft 11 in)|
|Track length on ground, mm (inches)||2588 (102)|
|Ground clearance, mm (inches)||432 (17)|
|Track gauge - standard, mm (ft/in)||1880 (6 ft 2 in)|
|Shovel 1 width, mm (ft/in)||2591 (8 ft 6 in)|
|Shovel 1 dump height 45° max, mm (ft/in)||2950 (9 ft 8 in)|
|Bucket pin height, mm (ft/in)||4080 (13 ft 4 in)|
|Bucket reach - max, mm (ft/in)||1100 (3 ft 7 in)|
|Digging depth, mm (inches)||167 (6.6)|
|Steering clutches and brakes||No|
|Fuel tank capacity, ltr (gallons (US))||326 (86)|
|Implement hydraulic tank, ltr (gallons (US))||103 (27.2)|
|Shovel 1 capacity, m³ (yd³)||2.5 (3.2)|
|Ground bearing pressure - standard, kPa (PSI)||69.6 (10.1)|
|Static tipping load shovel 1, kg (lbs)||15362 (33867)|
|Breakout force - max, kN (lbf)||197 (44287)|
|Alternator output, Amp||100|
|Pump type||Piston Pump - Load Sensed|
|Pump flow, lt/min (gallons (US) / min)||246 (65)|
|Relief pressure, kPa (PSI)||26028 (3775)|