655K CRAWLER LOADER
- Net Power: 116 kW (155 hp) @ 1,400 rpm
- Operating Weight: 18 422 kg (40,614 lb.)
- Heaped Capacity: 1.9 m3 (2.4 cu. yd.)
- Breakout Force: 148 kN (33,271 lbf)
View Product Brochure
FT4/Stage IV-compliant 6.8-L John Deere PowerTech™ engine boasts a boost in horsepower and standard Eco mode, for maximum fuel economy without loss of performance.
Auto-idle helps save fuel by reducing engine speed when the crawler loader is not moving and no functions are being activated.
Dual-path hydrostatic (HST) transmission allows you to carry a full load through turns without losing material.
HST drivetrain and load-sensing hydraulics deliver fatigue-beating, low-effort response and control, at all times and in all conditions.
Hydraulically driven fan runs only as needed, for cooling and fuel efficiency.
Counter-rotating tracks boost maneuverability on crowded jobsites.
Infinitely variable speed range to 6.2 mph
Single-lever joystick or two or three-lever hydraulic controls - choose the layout that best fits your operator’s style.
Control the throttle using buttons on the sealed-switch module.
Heavy-duty undercarriage is sealed, lubricated, and built to last.
Swing-out side shields and tilt-out grille enable access to both sides of the coolers, for low effort debris removal.
Compare the specifications of up to 4 models
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PVS 6068|
|Emission Rating||Tier 4|
|Displacement, ltr (Inches³)||6.8 (415)|
|Rated Speed, rpm||1700|
|Engine Output - Net, kW (hp)||116 (155)|
|Final drive type||In-line Drive Motor - Double Reduction Planetary|
|Track rollers per side - std||6|
|Track shoe pitch, mm (inches)||190 (7.5)|
|Track shoe width, mm (inches)||510 (20)|
|Ground Contact Area, cm² (Inches²)||24622 (3816)|
|Track shoes per side - std||38|
|Overall length, mm (ft/in)||6735 (22 ft 1 in)|
|Max. height, mm (ft/in)||3120 (10 ft 3 in)|
|Track length on ground, mm (inches)||2414 (95)|
|Ground clearance, mm (inches)||395 (15.6)|
|Track gauge - standard, mm (ft/in)||1740 (5 ft 9 in)|
|Shovel 1 width, mm (ft/in)||2470 (8 ft 1 in)|
|Shovel 1 dump height 45° max, mm (ft/in)||2665 (8 ft 9 in)|
|Bucket pin height, mm (ft/in)||3710 (12 ft 2 in)|
|Bucket reach - max, mm (ft/in)||1036 (3 ft 5 in)|
|Digging depth, mm (inches)||152 (6)|
|Steering clutches and brakes||No|
|Fuel tank capacity, ltr (gallons (US))||263 (69.5)|
|Implement hydraulic tank, ltr (gallons (US))||121.5 (32.1)|
|Shovel 1 capacity, m³ (yd³)||1.9 (2.4)|
|Ground bearing pressure - standard, kPa (PSI)||73.7 (10.7)|
|Static tipping load shovel 1, kg (lbs)||12443 (27432)|
|Breakout force - max, kN (lbf)||148 (33271)|
|Alternator output, Amp||100|
|Pump type||Piston Pump - Load Sensed|
|Pump flow, lt/min (gallons (US) / min)||189 (50)|
|Relief pressure, kPa (PSI)||26028 (3775)|